Delphi FJ10057 Fuel Injector

Delphi FJ10057 Fuel Injector Review

Delphi FJ10057 Fuel Injector Feature

• Accurate, tightly controlled fuel spray pattern for more efficient fuel vaporization, reducing unburned hydrocarbon emissions
• Internal seal rings protected from fuel exposure, minimizing in-use "sticking" for longer-lasting durability
• Improved sealing materials, providing cold sealing to -40 degrees C for better cold starts
• Mulitifuel capability

Delphi is an original equipment brand that partners with other manufacturers to supply the parts your car was originally built with. This product is in a Delphi package, note that the part may have been manufactured by an independent Delphi supplier.

AUS Injection MP-10188 Remanufactured Fuel Injector - 1997-2001 Infiniti With 4.1L V8 Engine

AUS Injection MP-10188 Remanufactured Fuel Injector - 1997-2001 Infiniti With 4.1L V8 Engine Review

AUS Injection MP-10188 Remanufactured Fuel Injector - 1997-2001 Infiniti With 4.1L V8 Engine Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Quality remanufactured fuel injectors that are electronically tested for correct electrical resistance and for coil weakness. Good units are then disassembled (micro filter, seals, pintle caps and plastic spacer are removed.) Injectors are simultaneously cleaned in ultrasonic tanks specially designed to clean fuel injectors. All units are individually back flushed to remove the broken dirt particles, these particles can not be removed thru the injection orifices therefore are driven out thru the inlet of the injector. All injectors are then mounted on the flow bench in an inverted position to allow them to reverse flow at a considerable pressure. We run a high performance injector cleaning solvent thru the injectors for 30 minutes, completing the cleaning process. This process assures all dirt particles are completely removed from the injector. Injectors are now mounted on the flow bench in the correct position to begin the testing procedures. We apply 60 PIS of pressure (more than a regular multi-port fuel injection system) and maintain the injectors with no signal to them for 30 seconds to make sure there are no leaks. Depending on the original manufacturer presentation, the injectors are either painted or polished to give the best cosmetic appearance possible. Injectors are then assembled with new replaceable components (filter baskets, pintle caps, O-rings and seals) and a final test is performed with all new components on injectors. The purpose of this test is to make sure the filter basket; o-rings, seals and pintle caps are positioned correctly and are not disturbing the flow or the spray pattern of the injector. Injectors are lubricated with special oil and protective caps are placed on both ends to extend the shelf life and assure that when they are installed in the vehicle they will be in optimum operating condition. Each injector is individually bagged.

HEET 28202 Iso-HEET Premium Fuel-line Antifreeze Water Remover and Injector Cleaner - 12 Fl oz.

HEET 28202 Iso-HEET Premium Fuel-line Antifreeze Water Remover and Injector Cleaner - 12 Fl oz. Review

HEET 28202 Iso-HEET Premium Fuel-line Antifreeze Water Remover and Injector Cleaner - 12 Fl oz. Feature

• No.1 selling brand of premium gas-line antifreeze
• Absorbs 5 times more water than regular gas dryers
• Removes water from fuel system
• Prevents rust and corrosion
• This item is not for sale in Catalina Island

Gold Eagle Iso-HEET Gas Line Anti Freeze is the premium gas line anti freeze that absorbs up to 5 times the water of regular gas dryers. It is designed for year round use in all 2 and 4 cycle gas and diesel engines. Iso-HEET prevents rust and corrosion by getting the water out. This anti-freeze can be used with every fill up in below freezing temperatures or whenever you want to absorb water from gas or diesel fuel. This product comes in an easy pour 12 ounce bottle.

Beck Arnley 1550041 Remanufactured Fuel Injector

Beck Arnley 1550041 Remanufactured Fuel Injector Review

Beck Arnley 1550041 Remanufactured Fuel Injector Feature

• Monitors the flow rates
• Features optimum function
• Ensures superior performance
• Engineered to enhance durability
• Manufacturer assured reliability

Beck Arnley Remanufactured Fuel Injector is precision engineered and manufactured for superior performance and longer life. It monitors the flow rates to ensure optimum function. This injector exceeds all modern standards and OEM specifications for form, fit and function.

ACDelco 217-231 Fuel Injector Assembly

ACDelco 217-231 Fuel Injector Assembly Review

ACDelco 217-231 Fuel Injector Assembly Feature

• Strict quality control for trouble-free performance
• 12-month/12,000-Mile Limited Warranty
• ACDelco is an Original Equipment (OE) supplier and has the experience engineering and manufacturing components that achieve the highest quality standards required by vehicle manufacturers

OE Service Fuel Injectors

When you are looking for a match to original equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done. Our lineup of OE Service Fuel Injectors, Control Modules, Mass Air Flow Sensors, Oxygen Sensors, Exhaust Gas Recirculation Valves, Manifold Absolute Pressure Sensors, Throttle Position Sensors, Idle Air Control Valves and Secondary Air Injection Reaction Systems will help your GM vehicle run as efficiently and cleanly as the day it rolled off the line. Trust ACDelco to help your vehicle run clean and green.

ACDelco Original Equipment Service Fuel Injectors are the ideal replacement for worn original equipment in your GM vehicle. Strict quality control for trouble-free performance. Competitive warranty coverage

VENOM HP-624-8, High Flow, Maximum Performance, 24 LB/HR Flow Rate, Fuel Injector Set of 8

VENOM HP-624-8, High Flow, Maximum Performance, 24 LB/HR Flow Rate, Fuel Injector Set of 8 Review

VENOM HP-624-8, High Flow, Maximum Performance, 24 LB/HR Flow Rate, Fuel Injector Set of 8 Feature

• Precision balanced set of 8, 24 LB/HR performance injectors
• Designed to support up to 310 Horsepower
• Universal fit for grommet style, multi-port applications
• High impedance (Ohm) coil
• Used by top, professional race teams, not for street use

VENOM Performance Fuel Injectors are 100% flow tested, balanced and matched to within +/- 1.5% of their nominal flow rate. These injectors are sold in matched sets. The Fuel Injector Pintle Assemblies are matched and blueprinted to increase flow rate and fuel atomization. All internal O-rings are manufactured of an advanced polyelastamer compound which increases their resistance to fuel chemicals and also, resists damage caused by the higher temperatures performance engines create. The Electromagnetic Coils injector coils are molded of aerospace grade materials and wound with micro-meter tolerances to decrease activation time at the start of each duty cycle. The coils are encased in Kapton tape and molded to protect against electrical current leaching when under severe load. In manufacturing the Electrical Plug VENOM uses solid copper terminals to increase current flow to the coils. Also the terminals and guide pins are slightly oversized to ensure a tighter fit and lesson the chance of corrosion damage, while maintaining a solid electrical connection. The Filter Basket is a fine mesh filter designed to protect the injector internals from contaminant damage. The filter is also manufactured from a fuel/oil resistant polyelastamer. The External Injector Seals are included for each injector and are also designed to withstand the pressures and heat generated by performance applications.

ACDelco PT2342 Professional Inline To Fuel Injector Harness Connector

ACDelco PT2342 Professional Inline To Fuel Injector Harness Connector Review

ACDelco PT2342 Professional Inline To Fuel Injector Harness Connector Feature

• OE-like connectors allow for more efficient, less costly wiring harness repairs on all GM vehicles
• 12-month/12,000-Mile Limited Warranty
• ACDelco is an Original Equipment (OE) supplier and has the experience engineering and manufacturing components that achieve the highest quality standards required by vehicle manufacturers

Features and Benefits
ACDelco Professional Pigtail Connectors, Lamp Sockets and Trailer Connectors are the choice for replacing worn equipment. OE-like connectors allow for more efficient, less costly wiring harness repairs on all GM vehicles. Have broad coverage available for most vehicles on the road today from 1980 to present. Connectors are more efficient, less costly.

ACDelco 217-1506 Fuel Injector

ACDelco 217-1506 Fuel Injector Review

ACDelco 217-1506 FUEL INJECTOR

AUS Injection MP-10253 Remanufactured Fuel Injector

AUS Injection MP-10253 Remanufactured Fuel Injector Review

AUS Injection MP-10253 Remanufactured Fuel Injector Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Quality remanufactured fuel injectors that are electronically tested for correct electrical resistance and for coil weakness. Good units are then disassembled (micro filter, seals, pintle caps and plastic spacer are removed.) Injectors are simultaneously cleaned in ultrasonic tanks specially designed to clean fuel injectors. All units are individually back flushed to remove the broken dirt particles, these particles can not be removed thru the injection orifices therefore are driven out thru the inlet of the injector. All injectors are then mounted on the flow bench in an inverted position to allow them to reverse flow at a considerable pressure. We run a high performance injector cleaning solvent thru the injectors for 30 minutes, completing the cleaning process. This process assures all dirt particles are completely removed from the injector. Injectors are now mounted on the flow bench in the correct position to begin the testing procedures. We apply 60 PIS of pressure (more than a regular multi-port fuel injection system) and maintain the injectors with no signal to them for 30 seconds to make sure there are no leaks. Depending on the original manufacturer presentation, the injectors are either painted or polished to give the best cosmetic appearance possible. Injectors are then assembled with new replaceable components (filter baskets, pintle caps, O-rings and seals) and a final test is performed with all new components on injectors. The purpose of this test is to make sure the filter basket; o-rings, seals and pintle caps are positioned correctly and are not disturbing the flow or the spray pattern of the injector. Injectors are lubricated with special oil and protective caps are placed on both ends to extend the shelf life and assure that when they are installed in the vehicle they will be in optimum operating condition. Each injector is individually bagged.

Red Line 60103 SI-1 Fuel System Cleaner - 15 oz.

Red Line 60103 SI-1 Fuel System Cleaner - 15 oz. Review

Red Line 60103 SI-1 Fuel System Cleaner - 15 oz. Feature

• Fuel injector cleaner
• Cleans pollution control valve
• Reduces octane requirements
• Raises fuel economy
• Protects the fuel system from rust

SI-1 injector and valve detergent is a concentrated package of the most powerful high-temperature detergents available to clean gasoline fuel injectors or carburetors, intake valves and combustion chambers and can clean injectors to nearly 100 percent efficiency in one treatment. The cleansing effect on injector deposits can raise fuel economy approximately 12 percent or even greater, depending on the condition of the injectors.

VENOM HP-624-6, High Flow, Maximum Performance, 24 LB/HR Flow Rate, Fuel Injector Set of 6

VENOM HP-624-6, High Flow, Maximum Performance, 24 LB/HR Flow Rate, Fuel Injector Set of 6 Review

VENOM HP-624-6, High Flow, Maximum Performance, 24 LB/HR Flow Rate, Fuel Injector Set of 6 Feature

• Precision balanced set of 6, 24 LB/HR performance injectors
• Designed to support up to 310 Horsepower
• Universal fit for grommet style, multi-port applications
• High impedance (Ohm) coil
• Used by top, professional race teams, not for street use

VENOM Performance Fuel Injectors are 100% flow tested, balanced and matched to within +/- 1.5% of their nominal flow rate. These injectors are sold in matched sets. The Fuel Injector Pintle Assemblies are matched and blueprinted to increase flow rate and fuel atomization. All internal O-rings are manufactured of an advanced polyelastamer compound which increases their resistance to fuel chemicals and also, resists damage caused by the higher temperatures performance engines create. The Electromagnetic Coils injector coils are molded of aerospace grade materials and wound with micro-meter tolerances to decrease activation time at the start of each duty cycle. The coils are encased in Kapton tape and molded to protect against electrical current leaching when under severe load. In manufacturing the Electrical Plug VENOM uses solid copper terminals to increase current flow to the coils. Also the terminals and guide pins are slightly oversized to ensure a tighter fit and lesson the chance of corrosion damage, while maintaining a solid electrical connection. The Filter Basket is a fine mesh filter designed to protect the injector internals from contaminant damage. The filter is also manufactured from a fuel/oil resistant polyelastamer. The External Injector Seals are included for each injector and are also designed to withstand the pressures and heat generated by performance applications.

ACDelco 217-2292 Fuel Injector Kit

ACDelco 217-2292 Fuel Injector Kit Review

ACDelco 217-2292 Fuel Injector Kit Feature

• Strict quality control for trouble-free performance
• 12-month/12,000-Mile Limited Warranty
• ACDelco is an Original Equipment (OE) supplier and has the experience engineering and manufacturing components that achieve the highest quality standards required by vehicle manufacturers

OE Service Fuel Injectors

When you are looking for a match to original equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done. Our lineup of OE Service Fuel Injectors, Control Modules, Mass Air Flow Sensors, Oxygen Sensors, Exhaust Gas Recirculation Valves, Manifold Absolute Pressure Sensors, Throttle Position Sensors, Idle Air Control Valves and Secondary Air Injection Reaction Systems will help your GM vehicle run as efficiently and cleanly as the day it rolled off the line. Trust ACDelco to help your vehicle run clean and green.

ACDelco Original Equipment Service Fuel Injectors are the ideal replacement for worn original equipment in your GM vehicle. Strict quality control for trouble-free performance. Competitive warranty coverage

AUS Injection TB-24015 Remanufactured Fuel Injector

AUS Injection TB-24015 Remanufactured Fuel Injector Review

AUS Injection TB-24015 Remanufactured Fuel Injector Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Quality remanufactured fuel injectors that are electronically tested for correct electrical resistance and for coil weakness. Good units are then disassembled (micro filter, seals, pintle caps and plastic spacer are removed.) Injectors are simultaneously cleaned in ultrasonic tanks specially designed to clean fuel injectors. All units are individually back flushed to remove the broken dirt particles, these particles can not be removed thru the injection orifices therefore are driven out thru the inlet of the injector. All injectors are then mounted on the flow bench in an inverted position to allow them to reverse flow at a considerable pressure. We run a high performance injector cleaning solvent thru the injectors for 30 minutes, completing the cleaning process. This process assures all dirt particles are completely removed from the injector. Injectors are now mounted on the flow bench in the correct position to begin the testing procedures. We apply 60 PIS of pressure (more than a regular multi-port fuel injection system) and maintain the injectors with no signal to them for 30 seconds to make sure there are no leaks. Depending on the original manufacturer presentation, the injectors are either painted or polished to give the best cosmetic appearance possible. Injectors are then assembled with new replaceable components (filter baskets, pintle caps, O-rings and seals) and a final test is performed with all new components on injectors. The purpose of this test is to make sure the filter basket; o-rings, seals and pintle caps are positioned correctly and are not disturbing the flow or the spray pattern of the injector. Injectors are lubricated with special oil and protective caps are placed on both ends to extend the shelf life and assure that when they are installed in the vehicle they will be in optimum operating condition. Each injector is individually bagged.

ACDelco 217-1431 Fuel Injector

ACDelco 217-1431 Fuel Injector Review

ACDelco 217-1431 Fuel Injector Feature

• Strict quality control for trouble-free performance
• 12-month/12,000-Mile Limited Warranty
• ACDelco is an Original Equipment (OE) supplier and has the experience engineering and manufacturing components that achieve the highest quality standards required by vehicle manufacturers

OE Service Fuel Injectors

When you are looking for a match to original equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done. Our lineup of OE Service Fuel Injectors, Control Modules, Mass Air Flow Sensors, Oxygen Sensors, Exhaust Gas Recirculation Valves, Manifold Absolute Pressure Sensors, Throttle Position Sensors, Idle Air Control Valves and Secondary Air Injection Reaction Systems will help your GM vehicle run as efficiently and cleanly as the day it rolled off the line. Trust ACDelco to help your vehicle run clean and green.

ACDelco Original Equipment Service Fuel Injectors are the ideal replacement for worn original equipment in your GM vehicle. Strict quality control for trouble-free performance. Competitive warranty coverage

Delphi FJ10475 Fuel Injector

Delphi FJ10475 Fuel Injector Review

Delphi FJ10475 Fuel Injector Feature

• Accurate, tightly controlled fuel spray pattern for more efficient fuel vaporization, reducing unburned hydrocarbon emissions
• Internal seal rings protected from fuel exposure, minimizing in-use "sticking" for longer-lasting durability
• Improved sealing materials, providing cold sealing to -40 degrees C for better cold starts
• Mulitifuel capability

Delphi is an original equipment brand that partners with other manufacturers to supply the parts your car was originally built with. This product is in a Delphi package, note that the part may have been manufactured by an independent Delphi supplier.

Help 85850 Bosch Fuel Injector Repair Kit

Help 85850 Bosch Fuel Injector Repair Kit Review

Help 85850 Bosch Fuel Injector Repair Kit Feature

• 2-wire
• Replaces worn OEM parts

The Help 2-wire Bosch fuel injector repair kit will replace your worn out OEM part.

AUS Injection MP-50116 Remanufactured Fuel Injector - 2004 Saturn With 3.0L V6 DOHC Engine

AUS Injection MP-50116 Remanufactured Fuel Injector - 2004 Saturn With 3.0L V6 DOHC Engine Review

AUS Injection MP-50116 Remanufactured Fuel Injector - 2004 Saturn With 3.0L V6 DOHC Engine Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Fuel Injector