Delphi FJ10594 Fuel Injector

Delphi FJ10594 Fuel Injector Review

Delphi FJ10594 Fuel Injector Feature

• Accurate, tightly controlled fuel spray pattern for more efficient fuel vaporization, reducing unburned hydrocarbon emissions
• Internal seal rings protected from fuel exposure, minimizing in-use "sticking" for longer-lasting durability
• Improved sealing materials, providing cold sealing to -40 degrees C for better cold starts
• Mulitifuel capability
• Delphi is an original equipment brand that partners with other manufacturers to supply the parts your car was originally built with. This product is in a Delphi package, note that the part may have been manufactured by an independent Delphi supplier.

Delphi is an original equipment brand that partners with other manufacturers to supply the parts your car was originally built with. This product is in a Delphi package, note that the part may have been manufactured by an independent Delphi supplier.

AUS Injection MP-10287 Remanufactured Fuel Injector - 1993 Toyota Camry With 2.2L Engine

AUS Injection MP-10287 Remanufactured Fuel Injector - 1993 Toyota Camry With 2.2L Engine Review

AUS Injection MP-10287 Remanufactured Fuel Injector - 1993 Toyota Camry With 2.2L Engine Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Quality remanufactured fuel injectors that are electronically tested for correct electrical resistance and for coil weakness. Good units are then disassembled (micro filter, seals, pintle caps and plastic spacer are removed.) Injectors are simultaneously cleaned in ultrasonic tanks specially designed to clean fuel injectors. All units are individually back flushed to remove the broken dirt particles, these particles can not be removed thru the injection orifices therefore are driven out thru the inlet of the injector. All injectors are then mounted on the flow bench in an inverted position to allow them to reverse flow at a considerable pressure. We run a high performance injector cleaning solvent thru the injectors for 30 minutes, completing the cleaning process. This process assures all dirt particles are completely removed from the injector. Injectors are now mounted on the flow bench in the correct position to begin the testing procedures. We apply 60 PIS of pressure (more than a regular multi-port fuel injection system) and maintain the injectors with no signal to them for 30 seconds to make sure there are no leaks. Depending on the original manufacturer presentation, the injectors are either painted or polished to give the best cosmetic appearance possible. Injectors are then assembled with new replaceable components (filter baskets, pintle caps, O-rings and seals) and a final test is performed with all new components on injectors. The purpose of this test is to make sure the filter basket; o-rings, seals and pintle caps are positioned correctly and are not disturbing the flow or the spray pattern of the injector. Injectors are lubricated with special oil and protective caps are placed on both ends to extend the shelf life and assure that when they are installed in the vehicle they will be in optimum operating condition. Each injector is individually bagged.

OTC 7649 Fuel Injector Cleaning Kit

OTC 7649 Fuel Injector Cleaning Kit Review

OTC 7649 Fuel Injector Cleaning Kit Feature

• Clogged fuel injectors cause sluggish engine performance poor fuel economy and a rough idle
• You can easily correct such problems with this injector cleaning kit. It works on a wide range of engines both domestic and imported
• Using the Pro Inject-R Kleen fluid you can effectively clean injectors restore their spray patterns and prevent recurring deposits
• The kit also enables you to do low- and high-pressure fuel system tests. It will also work with your shop's pressurized air supply for more powerful cleaning without expensive propellants
• Removes carbon from intake and combustion systems when used with fitting number 7666 and number 7904A D-Karbonizer4 fluid

OTC Fuel Injector Cleaning Kit Clogged fuel injectors cause sluggish engine performance poor fuel economy and a rough idle. You can easily correct such problems with this injector cleaning kit. It works on a wide range of engines both domestic and imported. Using the Pro Inject-R Kleen fluid you can effectively clean injectors restore their spray patterns and prevent recurring deposits. The kit also enables you to do low- and high-pressure fuel system tests. It will also work with your shop's pressurized air supply for more powerful cleaning without expensive propellants. It removes carbon from intake and combustion systems when used with fitting number 7666 and number 7904A D-Karbonizer4 fluid. It includes canister gauge hose fittings operating instructions.

AUS Injection MP-54046 Remanufactured Fuel Injector - 2000 Chevrolet With 2.2L Engine

AUS Injection MP-54046 Remanufactured Fuel Injector - 2000 Chevrolet With 2.2L Engine Review

AUS Injection MP-54046 Remanufactured Fuel Injector - 2000 Chevrolet With 2.2L Engine Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Quality remanufactured fuel injectors that are electronically tested for correct electrical resistance and for coil weakness. Good units are then disassembled (micro filter, seals, pintle caps and plastic spacer are removed.) Injectors are simultaneously cleaned in ultrasonic tanks specially designed to clean fuel injectors. All units are individually back flushed to remove the broken dirt particles, these particles can not be removed thru the injection orifices therefore are driven out thru the inlet of the injector. All injectors are then mounted on the flow bench in an inverted position to allow them to reverse flow at a considerable pressure. We run a high performance injector cleaning solvent thru the injectors for 30 minutes, completing the cleaning process. This process assures all dirt particles are completely removed from the injector. Injectors are now mounted on the flow bench in the correct position to begin the testing procedures. We apply 60 PIS of pressure (more than a regular multi-port fuel injection system) and maintain the injectors with no signal to them for 30 seconds to make sure there are no leaks. Depending on the original manufacturer presentation, the injectors are either painted or polished to give the best cosmetic appearance possible. Injectors are then assembled with new replaceable components (filter baskets, pintle caps, O-rings and seals) and a final test is performed with all new components on injectors. The purpose of this test is to make sure the filter basket; o-rings, seals and pintle caps are positioned correctly and are not disturbing the flow or the spray pattern of the injector. Injectors are lubricated with special oil and protective caps are placed on both ends to extend the shelf life and assure that when they are installed in the vehicle they will be in optimum operating condition. Each injector is individually bagged.

AUS Injection MP-55049 Remanufactured Fuel Injector - 1999-2001 Honda With 2.0L Engine

AUS Injection MP-55049 Remanufactured Fuel Injector - 1999-2001 Honda With 2.0L Engine Review

AUS Injection MP-55049 Remanufactured Fuel Injector - 1999-2001 Honda With 2.0L Engine Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Quality remanufactured fuel injectors that are electronically tested for correct electrical resistance and for coil weakness. Good units are then disassembled (micro filter, seals, pintle caps and plastic spacer are removed.) Injectors are simultaneously cleaned in ultrasonic tanks specially designed to clean fuel injectors. All units are individually back flushed to remove the broken dirt particles, these particles can not be removed thru the injection orifices therefore are driven out thru the inlet of the injector. All injectors are then mounted on the flow bench in an inverted position to allow them to reverse flow at a considerable pressure. We run a high performance injector cleaning solvent thru the injectors for 30 minutes, completing the cleaning process. This process assures all dirt particles are completely removed from the injector. Injectors are now mounted on the flow bench in the correct position to begin the testing procedures. We apply 60 PIS of pressure (more than a regular multi-port fuel injection system) and maintain the injectors with no signal to them for 30 seconds to make sure there are no leaks. Depending on the original manufacturer presentation, the injectors are either painted or polished to give the best cosmetic appearance possible. Injectors are then assembled with new replaceable components (filter baskets, pintle caps, O-rings and seals) and a final test is performed with all new components on injectors. The purpose of this test is to make sure the filter basket; o-rings, seals and pintle caps are positioned correctly and are not disturbing the flow or the spray pattern of the injector. Injectors are lubricated with special oil and protective caps are placed on both ends to extend the shelf life and assure that when they are installed in the vehicle they will be in optimum operating condition. Each injector is individually bagged.

ACCEL 150821 Performance Fuel Injector

ACCEL 150821 Performance Fuel Injector Review

ACCEL 150821 Performance Fuel Injector Feature

• Excellent atomization of fuel
• Improved fuel economy
• Improved throttle response
• Improved burn efficiency
• High design impedance

Accel Performance Fuel Injector provides precise control of fuel delivery and atomization for increased power. It features high design impedance and utilizes a precision-ground pintle design to produce ultra-fine fuel atomization. This injector offers improved throttle response and enhanced fuel economy. This fuel injector facilitates easy installation with precision-molded O-rings and fine-mesh fuel strainers.

Gunk M2616 Complete Fuel System Cleaner - 12 fl. oz.

Gunk M2616 Complete Fuel System Cleaner - 12 fl. oz. Review

Gunk M2616 Complete Fuel System Cleaner - 12 fl. oz. Feature

• Frees sticky valves and rings
• Removes gum, varnish and carbon from internal engine parts
• Helps restore lost power
• Prevents stalling, carburetor icing and pre-ignition
• This item is not for sale in Catalina Island

Gunk Complete Fuel System Cleaner frees sticky valves and rings. It removes gum, varnish and carbon from internal engine parts and helps restore lost power. This cleaner prevents stalling, carburetor icing and pre-ignition and cleans entire fuel system.

AUS Injection MP-10277 Remanufactured Fuel Injector - 1993 Toyota With 3.0L V6 Engine

AUS Injection MP-10277 Remanufactured Fuel Injector - 1993 Toyota With 3.0L V6 Engine Review

AUS Injection MP-10277 Remanufactured Fuel Injector - 1993 Toyota With 3.0L V6 Engine Feature

• Remanufactured In the USA
• All units are 100% factory tested before packaging
• Clean injectors provide better gas milage and increase overall performance
• All injectors are lubricated prior to packaging ensuring a trouble free installation
• All injectors are backed by a 12 month 12,000 mile warranty

Quality remanufactured fuel injectors that are electronically tested for correct electrical resistance and for coil weakness. Good units are then disassembled (micro filter, seals, pintle caps and plastic spacer are removed.) Injectors are simultaneously cleaned in ultrasonic tanks specially designed to clean fuel injectors. All units are individually back flushed to remove the broken dirt particles, these particles can not be removed thru the injection orifices therefore are driven out thru the inlet of the injector. All injectors are then mounted on the flow bench in an inverted position to allow them to reverse flow at a considerable pressure. We run a high performance injector cleaning solvent thru the injectors for 30 minutes, completing the cleaning process. This process assures all dirt particles are completely removed from the injector. Injectors are now mounted on the flow bench in the correct position to begin the testing procedures. We apply 60 PIS of pressure (more than a regular multi-port fuel injection system) and maintain the injectors with no signal to them for 30 seconds to make sure there are no leaks. Depending on the original manufacturer presentation, the injectors are either painted or polished to give the best cosmetic appearance possible. Injectors are then assembled with new replaceable components (filter baskets, pintle caps, O-rings and seals) and a final test is performed with all new components on injectors. The purpose of this test is to make sure the filter basket; o-rings, seals and pintle caps are positioned correctly and are not disturbing the flow or the spray pattern of the injector. Injectors are lubricated with special oil and protective caps are placed on both ends to extend the shelf life and assure that when they are installed in the vehicle they will be in optimum operating condition. Each injector is individually bagged.

CRC 05232 Diesel Fuel Therapy Diesel Injector Cleaner Plus - 30 Fl Oz.

CRC 05232 Diesel Fuel Therapy Diesel Injector Cleaner Plus - 30 Fl Oz. Review

CRC 05232 Diesel Fuel Therapy Diesel Injector Cleaner Plus - 30 Fl Oz. Feature

• Increases power and fuel economy by up to 4%
• This emmissions reducing formula is rated "SUPERIOR" in Cummins L-10 Test for injector cleanliness
• Not VOC Compliant for California & OTC
• Increases power and MPG
• This item is not for sale in Catalina Island

Fuel Therapy cleans injectors, conditions fuel and lubricates the fuel system.

Mag 1 142 Carburetor and Fuel Injector Cleaner - 12 oz., (Pack of 12)

Mag 1 142 Carburetor and Fuel Injector Cleaner - 12 oz., (Pack of 12) Review

Mag 1 142 Carburetor and Fuel Injector Cleaner - 12 oz., (Pack of 12) Feature

• Smoothes rough idle and eases hard starting
• Fights power loss and reduces exhaust emissions
• Protects against fuel system rust and corrosion
• Contains FMX to reduce engine friction and improve fuel economy

Specially formulated to help prevent build-up of performance-reducing deposits such as dirt, gum and varnish from fuel injectors and carburetors. Also aids in removing water from gas tank. 12 per case.

Delphi FJ10573 Fuel Injector

Delphi FJ10573 Fuel Injector Review

Delphi FJ10573 Fuel Injector Feature

• Accurate, tightly controlled fuel spray pattern for more efficient fuel vaporization, reducing unburned hydrocarbon emissions
• Internal seal rings protected from fuel exposure, minimizing in-use "sticking" for longer-lasting durability
• Improved sealing materials, providing cold sealing to -40 degrees C for better cold starts
• Mulitifuel capability

Delphi is an original equipment brand that partners with other manufacturers to supply the parts your car was originally built with. This product is in a Delphi package, note that the part may have been manufactured by an independent Delphi supplier.

Hickok 76462 Universal Electronic Fuel Injector Quick Probe

Hickok 76462 Universal Electronic Fuel Injector Quick Probe Review

Hickok 76462 Universal Electronic Fuel Injector Quick Probe Feature

• Designed with a super bright LED strobe which allows to visually monitor the injector pintle for consistent firing or misfires
• Prevents the necessity to hunt for the injector wires or upper plenum disassembly to test at the connector
• Backed by a limited lifetime warranty

Hickok Universal Electronic Fuel Injector Quick Probe Is designed with a super bright LED strobe which allows to visually monitor the injector pintle for consistent firing or misfires. The battery operated main unit with removable 7 inch probe tip allows access to virtually any injector even if it is buried under the upper intake plenum . Its fastest way to detect fuel injector firing, even when barely visible. It prevents the necessity to hunt for the injector wires or upper plenum disassembly to test at the connector. This probe is specifically tuned to detect the vibration frequencies caused when the fuel injector pintle snaps open. The LED strobe flashes each time the injector opens. Its backed by a limited lifetime warranty and is easy to use.

Standard Motor Products SK39 Fuel Injector Seal Kit

Standard Motor Products SK39 Fuel Injector Seal Kit Review

Standard Fuel Injection - Misc

Python Injection 621-042 Fuel Injector

Python Injection 621-042 Fuel Injector Review

Python Injection 621-042 Fuel Injector Feature

• Exact OE Replacement
• No Exchange of your Original Unit Required
• Free Technical Support at 1-800-959-2972
• Every Unit is Thoroughly Tested to Meet the Original Equipment Specifications - After it is Remanufactured
• Python Injection is the Leader in Fuel Injection Remanufacturing Technology

This Python Injection Inc. fuel injector 621-042 is the exact original equipment fuel injector that came with the vehicle from the factory. This item has been precisely remanufactured to all original specifications and is guaranteed to function exactly as the vehicle's original unit.

ACDelco 217-1602 Fuel Injector

ACDelco 217-1602 Fuel Injector Review

ACDelco 217-1602 Fuel Injector Feature

• Strict quality control for trouble-free performance
• 12-month/12,000-Mile Limited Warranty
• ACDelco is an Original Equipment (OE) supplier and has the experience engineering and manufacturing components that achieve the highest quality standards required by vehicle manufacturers

OE Service Fuel Injectors

When you are looking for a match to original equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done. Our lineup of OE Service Fuel Injectors, Control Modules, Mass Air Flow Sensors, Oxygen Sensors, Exhaust Gas Recirculation Valves, Manifold Absolute Pressure Sensors, Throttle Position Sensors, Idle Air Control Valves and Secondary Air Injection Reaction Systems will help your GM vehicle run as efficiently and cleanly as the day it rolled off the line. Trust ACDelco to help your vehicle run clean and green.

ACDelco Original Equipment Service Fuel Injectors are the ideal replacement for worn original equipment in your GM vehicle. Strict quality control for trouble-free performance. Competitive warranty coverage

ACDelco 217-1626 Fuel Injector

ACDelco 217-1626 Fuel Injector Review

ACDelco 217-1626 Fuel Injector Feature

• Strict quality control for trouble-free performance
• 12-month/12,000-Mile Limited Warranty
• ACDelco is an Original Equipment (OE) supplier and has the experience engineering and manufacturing components that achieve the highest quality standards required by vehicle manufacturers

OE Service Fuel Injectors

When you are looking for a match to original equipment specifications in a replacement part for your GM vehicle, trust ACDelco to get the job done. Our lineup of OE Service Fuel Injectors, Control Modules, Mass Air Flow Sensors, Oxygen Sensors, Exhaust Gas Recirculation Valves, Manifold Absolute Pressure Sensors, Throttle Position Sensors, Idle Air Control Valves and Secondary Air Injection Reaction Systems will help your GM vehicle run as efficiently and cleanly as the day it rolled off the line. Trust ACDelco to help your vehicle run clean and green.

ACDelco Original Equipment Service Fuel Injectors are the ideal replacement for worn original equipment in your GM vehicle. Strict quality control for trouble-free performance. Competitive warranty coverage

Delphi FJ10631 Fuel Injector

Delphi FJ10631 Fuel Injector Review

Delphi FJ10631 Fuel Injector Feature

• Accurate, tightly controlled fuel spray pattern for more efficient fuel vaporization, reducing unburned hydrocarbon emissions
• Internal seal rings protected from fuel exposure, minimizing in-use "sticking" for longer-lasting durability
• Improved sealing materials, providing cold sealing to -40 degrees C for better cold starts
• Mulitifuel capability

Delphi is an original equipment brand that partners with other manufacturers to supply the parts your car was originally built with. This product is in a Delphi package, note that the part may have been manufactured by an independent Delphi supplier.